805-323-6445 | info@windynation.com

clean|power to the people

This product qualifies for FREE SHIPPING
Large Three Blade Hub for Wind Turbine Generator Blades
SKU: ANH-3BLH-58
$41.99
4 lbs

This is an ultra-strong, precision-machined, powder coated steel hub. Perfect for mounting 3-blades to your wind generator or motor.

It is 3/16 inches thick and 16 inches in diameter.

The center hole is available with a 17 mm or 5/8 inch diameters. This makes it easy to mount on many common generator shafts, including Delco alternator-style generators which have 17 mm shafts. The 5/8 inch diameter is perfect for our Windtura series 500-Watt Wind Generator.

This hub is extremely strong and can handle any stress forces that will be applied by the blades spinning in very strong winds. There is no need to worry about this hub bending or cracking in strong winds.

It is 3/16 inches thick and 16 inches in diameter.

The center hole is available with a 17 mm or 5/8 inch diameters. This makes it easy to mount on many common generator shafts, including Delco alternator-style generators which have 17 mm shafts. The 5/8 inch diameter is perfect for our Windtura series 500-Watt Wind Generator.

The hub is powder coated steel and rust-resistant. This hub is extremely strong and can handle any stress forces that will be applied by the blades spinning in very strong winds. There is no need to worry about this hub bending or cracking in strong winds.