805-323-6445 | info@windynation.com

clean|power to the people

This product qualifies for FREE SHIPPING
Solar Tracker Tracking HD Single Axis Complete Kit
SKU: SOT-TRKS-HDS
$399.99
22 lbs

Includes all the electronics, motors and wires you need for a heavy duty single-axis solar tracker. Build your own frame and you will have a professional grade single-axis solar tracker!

This is our Heavy Duty (HD) model for building large solar trackers. The included linear actuator is capable of handling 1500-2000 Watt solar trackers.

  • Easy to assemble! Simply connect the appropriate length of wire from the linear actuator to the Electronics Box!
  • Single axis tracker provides up to 30% more power production than fixed solar panels
  • Actuator is capable of handling up to 1500-2000 Watts of solar panels
  • All electronics are water-tight and sealed in IP65 rated enclosures
  • Manual controls to move the solar tracker north, south, east and west
  • Actuator limit switches are pre-installed at the factory
  • 1 year warranty
    Comments
Operating Voltage 8 to 30 VDC Works with 12 or 24 volt DC power supplies. Do NOT exceed 30 VDC.
Maximum Operating Current 14 amps continuous 16 amps intermittent The linear actuators used in this kit draws a maximum of 9 amps. The tracking electronics can handle up to 16 amps.
Corrosion Resistance Conformal coating on all circuit boards Conformal coatings are generally applied to circuit boards that are used outdoors. They protect the electronics from moisture (humidity) and corrosion.
Moisture Ingress Protection IP65 Rated Enclosures Protects electronics from moisture.
UV Protection Wire and Enclosures are UV protected Both enclosures and all cable is outdoor rated and UV resistant.
Reverse Polarity Protection Yes If positive and negative power supplies wires are accidentally connected backwards, the internal fuse on the circuit board will blow and protect the electronics.
Short Circuit Protection Yes If any of the external wires are accidentally shorted together, the internal fuse on the circuit will blow and protect the electronics.

Linear Actuators Specifications

  East/West Actuator
Stroke length 24 inches
dynamic load 750 lbs (341 kg)
static load 1500 lbs (682 kg)
  Hardware for mounting included

The Suntura Solar Tracker Kit comes with manual control buttons that allow the user to manually move the north/south and east/west linear actuators. This is convenient if you want to position the solar tracker to wash the solar panels, if you want to position the solar panels for a high wind event, etc. See photo gallery.

The kit also includes two 20 amp fuses (one operational fuse and one extra spare fuse). See photo gallery.

 

We provide a detailed Owner's Manual which provides instructions on assembling and optimizing your Solar Tracker.