805-323-6445 | info@windynation.com

clean|power to the people

This product qualifies for FREE SHIPPING
P30L LCD 30A PWM Solar Panel Regulator Charge Controller with Digital Display and User Adjustable Settings
1 lbs

30 Amp Solar Charge Controller with LCD Display

WindyNation’s P30L solar charge controller is a premium grade PWM solar controller. The digital display provides all necessary solar system information and also serves as a user interface for adjusting the charge controller’s settings. It is the perfect solar charge controller for an RV, boat, small cabin or any other off-grid installation, where user configurability and system information is important.
  • WindyNation P30L PWM 30 Amp solar charge controller prevents battery from being overcharged and damaged by the solar panel
  • LCD digital display provides system information (amperage, voltage, temperature, etc.)
  • System settings are user adjustable by using the MODE and UP and DOWN buttons
  • Overload, short circuit, and reverse polarity protected. Battery temperature sensor (BTS) is included

Technical Specifications

Rated Current Charge 30 Amps
Rated Load Current 30 Amps
Typical Idle Consumption At idle < 5mA
Maximum Solar Input Voltage 48 V DC
Rated Working Voltage 12 V DC or 24V DC Battery System
Floating Charging Voltage (adjustable) 13.8 V DC 27.6 V DC
Low Voltage Protection (adjustable) 10.7 V DC 21.4V DC
Low Voltage Recovery (adjustable) 12.5 V DC 25.0V DC
No Load Loss ≤30mA
Loop Voltage Drop ≤170mV
Temperature Compensation -4.0 mV/Cell°C

Physical Specifications

Parameter Value
Dimension (L x W x H) 90 mm x 188 mm x 48 mm (3.54" x 7.40" x 1.89")
Weight 12.7 oz (360 g)
Operating Temperature 14°F to 140°F (-10°C to 60°C)
Operating Humidity ≤90% relative humidity (non-condensing)
Wire Size Up to 16mm² (7AWG)

Download the Owner's Manual and learn about installation, safety and configuration options available on your Charge Controller.