This product qualifies for FREE SHIPPING
P30L LCD 30A PWM Solar Panel Regulator Charge Controller with Digital Display and User Adjustable Settings
SKU: CHC-LCD-30
$50.99 1 lbs
30 Amp Solar Charge Controller with LCD Display
WindyNation’s P30L solar charge controller is a premium grade PWM solar controller. The digital display provides all necessary solar system information and also serves as a user interface for adjusting the charge controller’s settings. It is the perfect solar charge controller for an RV, boat, small cabin or any other off-grid installation, where user configurability and system information is important.
- WindyNation P30L PWM 30 Amp solar charge controller prevents battery from being overcharged and damaged by the solar panel
- LCD digital display provides system information (amperage, voltage, temperature, etc.)
- System settings are user adjustable by using the MODE and UP and DOWN buttons
- Overload, short circuit, and reverse polarity protected. Battery temperature sensor (BTS) is included
Technical Specifications
Rated Current Charge | 30 Amps |
Rated Load Current | 30 Amps |
Typical Idle Consumption | At idle < 5mA |
Maximum Solar Input Voltage | 48 V DC |
Rated Working Voltage | 12 V DC or 24V DC Battery System |
Floating Charging Voltage (adjustable) | 13.8 V DC 27.6 V DC |
Low Voltage Protection (adjustable) | 10.7 V DC 21.4V DC |
Low Voltage Recovery (adjustable) | 12.5 V DC 25.0V DC |
No Load Loss | ≤30mA |
Loop Voltage Drop | ≤170mV |
Temperature Compensation | -4.0 mV/Cell°C |
Physical Specifications
Parameter | Value |
Dimension (L x W x H) | 90 mm x 188 mm x 48 mm (3.54" x 7.40" x 1.89") |
Weight | 12.7 oz (360 g) |
Operating Temperature | 14°F to 140°F (-10°C to 60°C) |
Operating Humidity | ≤90% relative humidity (non-condensing) |
Wire Size | Up to 16mm² (7AWG) |
Download the Owner's Manual and learn about installation, safety and configuration options available on your Charge Controller.