805-323-6445 | info@windynation.com

clean|power to the people

This product qualifies for FREE SHIPPING
Solar Tracker Dual Axis Complete Kit-Electronics & Actuators
9 lbs

Includes all the electronics, motors and wires you need for a heavy duty dual-axis solar tracker. Build your own frame and you will have a professional grade dual-axis solar tracker!

  • Dual axis tracker provides up to 40% more power production than fixed solar panels
  • Engineered to hold up to 500 Watts of solar panels
  • All electronics are water-tight and sealed in IP65 rated enclosures
  • Manual controls to move the solar tracker north, south, east and west
  • Actuator limit switches are pre-installed at the factory
  • 1 year warranty
  • Tracker returns to east at sunset to await the sunrise the following morning
Operating Voltage 8 to 30 VDC Works with 12 or 24 volt DC power supplies. Do NOT exceed 30 VDC.
Maximum Operating Current 14 amps continuous 16 amps intermittent The linear actuators used in this kit draw 2 amps each (4 total). The tracking electronics can handle up to 16 amps.
Corrosion Resistance Conformal coating on all circuit boards Conformal coatings are generally applied to circuit boards that are used outdoors. They protect the electronics from moisture (humidity) and corrosion.
Moisture Ingress Protection IP65 Rated Enclosures Protects electronics from moisture.
UV Protection Wire and Enclosures are UV protected Both enclosures and all cable is outdoor rated and UV resistant.
Reverse Polarity Protection Yes If positive and negative power supplies wires are accidentally connected backwards, the internal fuse on the circuit board will blow and protect the electronics.
Short Circuit Protection Yes If any of the external wires are accidentally shorted together, the internal fuse on the circuit will blow and protect the electronics.

Linear Actuators Specifications

  East/West Actuator North/South Actuator
Stroke length 12 inches 6 inches
dynamic load 225 lbs (102 kg) 225 lbs (102 kg)
static load 625 lbs (312 kg) 625 lbs (312 kg)
  5/16 inch diameter mounting bolt holes (hardware included) 5/16 inch diameter mounting bolt holes (hardware included)

We provide a detailed Owner's Manual which provides instructions on assembling and optimizing your Solar Tracker.